swerver
February 22, 2020, 2:36pm
1900
Can’t comment on the pioneer, but i have the xone23 (not the c tho) and it’s alright. It does the job if ur just a bedroom dj with 2 decks. Build quality is fine for home use.
My issue with it is the phono pre amps, they’re not that great imo. Most records i have to have the input gain right up at like 4 o’clock to get decent metering, which doesn’t leave much room if you have a quiet pressing.
1 BigUp
sleeps
February 23, 2020, 10:16am
1901
Couldn’t find a decent/recent software gear lust thread so I’m putting this here.
From classic delays to experimental sounds, TkDelay is a highly versatile delay plugin with a bunch of functionalities that makes it unique.
Est. reading time: 8 minutes
Just bought that for the reverse delay alone - sounds so awesome in the demo.
42 quid as well. Bargain.
kruptah
February 27, 2020, 12:14am
1902
Decided on a Pioneer djm-450 and Mackie xr624
AxeD
February 27, 2020, 5:24pm
1903
Literally no one recommended that but fair does.
Bet it’s a better choice than the cheap A&H 2-channels.
Behringer appears to be staking out every historical synth brand it can. That's leading to some historical synth names - and some names very much already in use by someone else.
Est. reading time: 2 minutes
https://discchord.com/appnews/2020/03/03/fuck-behringer
lol
mks
March 4, 2020, 2:15am
1905
You heard about that feud between Peter Kirn of CDM and Uli Behringer. It was petty on Behringer’s part imo.
They just need to keep their head down and keep doing what they’re doing and not get involved in some bullshit.
I’m still waiting for my yellow 303 clone, the TD-3 with an acid smiley face on it.
1 BigUp
AxeD
March 4, 2020, 9:28am
1906
They’ve been doing the opposite forever though. Fuck them imo.
_ronzlo
March 7, 2020, 10:28pm
1907
Any recommendations for monitor stands with the dimensions as follows:
Physical Dimensions:
Height: 13.1" / 333mm
Width: 8.6" / 218mm
Depth: 12.6" / 320mm
Weight: 23.4 lb / 10.6 kg
Just looking for a reputable manufacturer.
Hibbie
March 8, 2020, 7:27am
1910
If they are on a surface then these iso stands are ok, they do 3 diff sizes.
https://isoacoustics.com/products/iso-stands-speaker-isolation-stands/
The iso200 sounds about right for them monitors:
http://isoacoustics.com/iso-200-isolation-stands/
Dunno if you are raising them from the floor tho
1 BigUp
Thinking I will to save room on my ikea Kallax.
Hibbie
March 8, 2020, 8:58am
1912
Could get wall brackets? That how i have mine and they are perfect imo
kruptah
March 12, 2020, 10:06am
1913
May be my best bet as I’m not seeing any stands that’re tall enough to face me at ear level.
Hibbie
April 13, 2020, 12:50pm
1916
Anyone recommend a condenser mic that isn’t too pricy?
AxeD
April 13, 2020, 2:45pm
1917
Audio Technica AT 2050
Rode NT1 or NT2
Liking these questions. Keep em coming.
3 Likes
Hibbie
April 13, 2020, 3:39pm
1918
Nt1 is looking like a good option price wise.
Would only be for sitting in front of a guitar amp to record anyway
AxeD
April 13, 2020, 4:09pm
1919
I always used dynamics to record amps. Like an sm57 or a 609.
In my opinion better suitable for close miking amps, but I’m sure you can get a good result with
the NT1. It’s a pretty versatile microphone. On a clean guitar you’ll get much brighter highs and
a nice well rounded low end. Depending on the placement of course but that’s compared to an
sm57 for example.
Do you have any mics already?
1 BigUp